Most common failures | No# failures |
---|
Steering headbearing has excessive free play |2.2.2| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Headlamp aim out of alignment | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Registration plate issues | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake hose damaged | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Handlebar handgrip missing |2.1.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Nearside Front Forks excessively corroded (2.2.2 (d) (i)) | 1 |