| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Rear Fuel cap sealing washer missing |7.2.2c| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Horn is not continous or uniform |1.7.3c| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Brake lever insecure |3.1.2a| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake lever excessively damaged |3.2.A1c| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Registration plate issues | 1 |
| Front Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
| Stop lamp remains on when the brakes are released | 1 |