Most common failures | No# failures |
---|
Headlamp aim out of alignment | 22 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Registration plate issues | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Brake pedal insecure |3.1.2a| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Nearside Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock |2.1.4 |a|| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Stop lamp does not illuminate immediately a brake applies rear switch |1.3.1a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Vehicle identification number not legible |6.3.5a| | 1 |
Footrest missing |6.2.1a| | 1 |
Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Offside Rear Lower Drive chain excessively tight |6.2.1d| | 1 |
Nearside Front Fuel pipe union leaking |7.2.1a| | 1 |
Offside Front Fuel tank leaking |7.2.1a| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |