>

MOT History from tests of petrol APRILIA PEGASOs year 1999

Review the list of common APRILIA PEGASO failures below or to perform a specific mot history check on your APRILIA then use our popular KnowYourCar service

mot history
Pass percent:77.55%
(The average a petrol APRILIA PEGASO year 1999 passes without issue)
Based on:637 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment31
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|11
Horn not working |1.7.3a|8
Drive chain excessively loose |6.2.1d|7
Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Rear wheel bearings have excessive free play |2.4.A.2c|6
Headlamp aim beam image kick up to the offside |1.6|5
Nearside Front Direction indicator not working |1.5.1c|5
Front wheel bearings have excessive free play |2.3.5b|4
Offside Front Direction indicator not working |1.5.1c|4
Registration plate lamp issues4
Wheel alignment incorrect which adversely affects the handling |2.5.1|4
Steering movement excessively `notchy` with the wheel raised |2.2.1b|4
Stop lamp remains on when the brake is released |1.3.1e|4
Steering headbearing has excessive free play |2.2.2|4
Rear shock absorber has inadequate damping effect. |2.4.A.3b|4
Nearside Front shock absorber seal failed and leaking oil |2.3.3|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Front Brake excessively binding (1.2.1 (f))3
Front Roller brake test indicates a binding brake |3.3.A1a|3
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Rear suspension bush has excessive free play |2.4.A2a|i||3
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Rear Stop lamp not working (4.3.1 (a) (ii))2
Offside Front Direction indicator not working (4.4.1 (a) (ii))2
Rear Rear suspension bush has excessive free play |2.4.A2a|i||2
Indicator switch insecure |1.5.4|2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Riders seat insecure |6.2.1a|2
Nearside Rear Footrest insecure |6.2.1a|2
Offside Rear Direction indicator not working |1.5.1c|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Wheel alignment incorrect which adversely affects the steering |2.5.1|2
Rear Stop lamp remains on when the brake is released |1.3.1e|2
Front Stop lamp remains on when the brake is released |1.3.1e|2
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|2
Registration plate issues2
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Drive chain excessively tight |6.2.1d|2
Central Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i))1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Offside Front Steering operation impeded by a fairing (2.1.4 (e))1
Rear Brake cylinder leaking (1.1.16 (b) (i))1
Drive chain excessively loose (6.1.7 (c) (i))1
Rear Drive chain excessively loose (6.1.7 (c) (i))1
Front Stop lamp not working |4.3.1 |a| |ii||1
Rear Suspension attachment bracket/mounting insecure linkage |5.3.3 |a| |i||1
Nearside Steering lock stop missing |2.1.3|1
Rear suspension component loose |2.4.A.1a|1
Position lamp switch insecure |1.1.4b|1
Fuel cap does not fasten securely by a positive means |7.2.2b|1
Offside Front Footrest insecure |6.2.1a|1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Rear Brake excessively binding (1.2.1 (f))1
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii))1
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))1
Rear Motorcycle structure joining/attachment plate or fastening insecure mudgaurd (6.1.1 (b) (i))1
Nearside Rear Exhaust silencer insecure (8.1.1 (b) (i))1
Nearside Rear Direction indicators not working |1.5.1c|1
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c|1
Headlamp insecure |1.2.3b|1
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a|1
Rear Brake disc|s| excessively scored |3.2.A1l|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front Fuel cap does not fasten securely by a positive means |7.2.2b|1
Fuel pipe union leaking |7.2.1a|1
Front Rear suspension bush has excessive free play |2.4.A2a|i||1
Offside Rear Footrest insecure |6.2.1a|1
Rear position lamp insecure Complete unit |1.1.1c|1
Rear wheel rotation likely to be impeded Due to rear wheel being out of line |6.2.1b|1
Rear Hydraulic brake control feels spongy |3.1.4a|1
Front Steering headbearing has excessive free play |2.2.2|1
Rear Footrest insecure |6.2.1a|1
Offside Front Direction indicators not working |1.5.1c|1
Rear Horn not working |1.7.3a|1
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Centre Exhaust is leaking and excessively noisey |7.1.1b|1
Front Position lamp not working |4.2.1 |a||1
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Offside Rear Direction indicator insecure |1.5.3b|1
Rear Drive chain sprocket worn to excess |6.2.1e|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c|1
Front wheel spindle securing nut|s| loose |2.3.3a|1
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c|1
Stop lamp not working (4.3.1 (a) (ii))1
Rear mono-shock pivot excessively worn |2.4.B.4|1
Rear Brake pedal cannot be applied smoothly |3.1.3d|1
Front Front position lamp missing |1.1.1a|1
Front Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Front Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Rear Suspension component pin or bush excessively worn Shock Linkage Bush (5.3.4 (a) (i))1
Nearside Rear Direction indicator not working |1.5.1c|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear Footrest missing |6.2.1a|1
Rear Lower Suspension rod pin or bush excessively worn Lower shock bearing excessive wear (5.3.4 (a) (i))1
Offside Rear Direction indicator not working |4.4.1 |a| |ii||1
Offside Brake pedal attachment screws loose |3.1.2b|1
Rear Shock absorber has negligible damping effect (5.3.2 (b))1
Rear Stop lamp deteriorated and function impaired |1.3.3a|1
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Handlebar deformed |2.1.1b|1
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c|1
Nearside Rear Stop lamp remains on when the brake is released |1.3.1e|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Centre Rear Exhaust is leaking and excessively noisey rear cans holed and deteriorated, link pipes also corroded |7.1.1b|1
Drive chain worn to excess |6.2.1e|1
Front wheel bearings are excessively rough |2.3.5b|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Direction indicators not working |1.5.1c|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Brake disc contaminated (1.1.14 (b))1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Offside Position lamp switch insecure (4.2.2 (b))1
Front Brake hose excessively stretched (1.1.12 (b) (ii))1
Rear reflector on motorcycle missing |1.4.1|1
Offside Front Steering lock stop maladjusted |2.1.3|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Horn not working (7.7 (a) (ii))1
Front Brake disc|s| is excessively distorted |3.2.A1m|1
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Front Front wheel bearings have excessive free play |2.3.5b|1
Offside Position lamp switch insecure |1.1.4b|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy