Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Registration plate issues | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Indicator switch insecure |1.5.4| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front Horn not working (7.7 (a)) | 1 |
Front Valve stem seriously misaligned (5.2.3 (j)) | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake performance not tested |3.3| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Upper Fork yoke insecure |2.2.2 |d| |i|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Handlebar restricted in free movement from lock to lock Fowling on Speedo Cable. (2.1.4 (c)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Front Brake master cylinder defective but brake still operating Sight Glass seriously Corroded/Damaged. (1.1.10 (b) (i)) | 1 |
Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Nearside Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Indicator switch defective |1.5.4| | 1 |
Footrest insecure |6.2.1a| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front An item not tested |Manual| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Wheel spoke excessively loose x 3 |4.2.1b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Registration plate lamp issues | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Stop lamp does not illuminate by the operation of both brake controls front brake switch (4.3.2 (a) (iii)) | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |