Most common failures | No# failures |
---|
Headlamp aim beam image kick up to the offside |1.6| | 19 |
Rear reflector on motorcycle missing |1.4.1| | 11 |
Headlamp aim out of alignment | 10 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front Headlamp aim beam image kick up to the offside |1.6| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Registration plate issues | 2 |
Front Fuel cap ineffective Unable to open fuel cap. |6.1.3 |b| |i|| | 2 |
Direction indicator not working |1.5.1c| | 1 |
Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Inner Front Upper Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Offside Rear Lower Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear spring worn and seriously weakened |2.4A1b|ii|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear suspension component loose |2.4.A.1a| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Horn not working |1.7.3a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Rear Brake component has an inadequate repair |3.1.5| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Upper Fuel hose leaking |7.2.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Horn missing |1.7.1| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Horn not working |1.7.3a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |