| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 68 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 43 |
| Registration plate issues | 39 |
| Headlamp aim out of alignment | 36 |
| Drive chain excessively loose |6.2.1d| | 32 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 25 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 23 |
| Drive chain worn to excess |6.2.1e| | 21 |
| Horn not working |1.7.3a| | 20 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 18 |
| Front wheel bearings have excessive free play |2.3.5b| | 18 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 12 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 12 |
| Front wheel bearings are excessively rough |2.3.5b| | 12 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
| Rear Footrest missing |6.2.1a| | 8 |
| Drive chain fouling another component |6.2.1d| | 8 |
| Offside Steering lock stop missing |2.1.3| | 8 |
| Headlamp aim not tested |1.6| | 8 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
| Headlamp insecure |1.2.3b| | 7 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 7 |
| Nearside Rear Footrest missing |6.2.1a| | 7 |
| Offside Rear Footrest missing |6.2.1a| | 7 |
| Nearside Steering lock stop ineffective |2.1.3| | 7 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 6 |
| Drive chain excessively tight |6.2.1d| | 6 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 6 |
| Stop lamp remains on when the brake is released |1.3.1e| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Riders seat insecure |6.2.1a| | 5 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
| Offside Rear Direction indicators not working |1.5.1c| | 5 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 5 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Nearside Steering lock stop missing |2.1.3| | 5 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Direction indicators not working |1.5.1c| | 5 |
| Nearside Rear Direction indicator not working |1.5.1c| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Fuel cap sealing washer missing |7.2.2c| | 4 |
| Nearside Rear Direction indicators not working |1.5.1c| | 4 |
| Rear reflector on motorcycle obscured |1.4.1| | 4 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Offside Steering lock stop ineffective |2.1.3| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Handlebar deformed |2.1.1b| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 3 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Nearside Handlebar handgrip missing |2.1.1c| | 2 |
| Front Direction indicators not working |1.5.1c| | 2 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear Lower Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Nearside Rear Direction indicator missing |1.5.1a| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 2 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear wheel insecure |4.2.3b| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Direction indicator missing |1.5.1a| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 2 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Direction indicator not working |1.5.1c| | 2 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Stop lamp missing |1.3.3a| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Chain guard insecure |6.2.1c| | 1 |
| Inner Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake hose excessively kinked rear master cylinder res feed pipe to master cyl kinked over after market air filter |3.2.B3a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride battery insecure |6.2.1h| | 1 |
| Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected lens missing showing white light to rear (4.4.1 (b) (ii)) | 1 |
| Rear Suspension arm attachment bracket/mounting insecure shock mounting has excessive play (5.3.3 (a) (i)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Lower Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Inner Upper Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Offside Rear Brake master cylinder has an excessively worn master cylinder pivot. |3.2.B5| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| An item not tested |Manual| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Chain guard insecure |6.2.1c| | 1 |
| Rear Brake master cylinder has an excessively worn master cylinder pivot. |3.2.B5| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
| Brake pedal is inoperative |3.1.3c| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Offside Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Rear Brake component inadequately mounted disk bolt fouling caliper bolt |1.1.21 |c|| | 1 |
| Fuel cap leaking |6.1.3 |b| |i|| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Steering lock stop missing |2.1.3| | 1 |
| Offside Front Suspension attachment bracket/mounting insecure pinch bolts hanging out (5.3.3 (a) (i)) | 1 |
| Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Steering lock stop ineffective l/h |2.1.3| | 1 |
| Direction indicators flashing more than 120 times per minute all |1.5.1c| | 1 |
| Direction indicators affected by the operation of another lamp horn turns indicators off when pressed |1.5.1c| | 1 |
| Brake hose is likely to be fouled or trapped by moving parts front |3.2.B2c| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering r/h lock |2.1.2a| | 1 |
| Rear Brake linked system has an excessively worn master cylinder pivot. |3.2.B5| | 1 |
| Rear Front mudguard insecure |2.3.7| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Front wheel spindle loose |2.3.3a| | 1 |
| Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear An item not tested |Manual| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front suspension assembly component missing Bolt |2.3.1| | 1 |
| Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Stop lamp not working front lever |4.3.1 |a| |ii|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Front Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride spindle lock nut split pin missing |6.2.1h| | 1 |
| Front Exhaust mounting does not fully support the exhaust system pipe |7.1.1.c| | 1 |
| Front Horn missing |1.7.1| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Offside Drive chain worn to excess |6.2.1e| | 1 |
| Front Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Brake master cylinder insecurely mounted bolt missing |3.2.B1a| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
| Brake component leaking fluid |3.2.B4| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
| Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Rear Direction indicator obscured |1.5.1a| | 1 |
| Horn missing |1.7.1| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Brake disc insecure (1.1.14 (a) (ii)) | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| All direction indicators missing (4.4.1 (a) (ii)) | 1 |
| Rear Brake linkage excessively corroded |3.2.A1c| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Rear Brake component defective due to a deliberate modification which significantly reduces the original strength caliper bracket |3.1.5| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Stop lamp does not illuminate immediately a brake applies from rear |1.3.1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride wrong way round |6.2.1h| | 1 |
| Offside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Centre Riders seat insecure |6.2.1a| | 1 |
| Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Brake lever excessively damaged |3.2.A1c| | 1 |
| Fuel cap missing |7.2.2a| | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear reflector on motorcycle missing (1.4.1) | 1 |
| Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Front Horn is not a constant note |1.7.3c| | 1 |
| Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |