>

MOT History from tests of petrol APRILIA MOJITOs year 2010

Review the list of common APRILIA MOJITO failures below or to perform a specific mot history check on your APRILIA then use our popular KnowYourCar service

mot history
Pass percent:74.66%
(The average a petrol APRILIA MOJITO year 2010 passes without issue)
Based on:363 MOT Tests
Most common failuresNo# failures
Rear Brake lever has inadequate reserve travel |3.1.3b|15
Headlamp aim out of alignment14
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||12
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|9
Registration plate issues7
Riders seat insecure |6.2.1a|5
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Steering headbearing has excessive free play |2.2.2|4
Steering movement excessively stiff with the wheel raised |2.2.1b|3
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Headlamp not working on main beam (4.1.1 (a) (ii))3
Horn not working |1.7.3a|3
Rear Brake lever has insufficient reserve travel (1.1.2 (a))3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Rear Position lamp not working |4.2.1 |a||2
Registration plate lamp issues2
Headlamp aim not tested |1.6|2
Nearside Rear Direction indicator not working |1.5.1c|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|2
Front wheel bearings have excessive free play |2.3.5b|2
Horn not working (7.7 (a) (ii))2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Front Wheel bearing has excessive play (5.1.3 (a) (i))2
Front wheel bearings are excessively rough |2.3.5b|2
Headlamp not working on dipped beam |4.1.1 |a| |ii||2
Headlamp not working on main beam |4.1.1 |a| |ii||2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Direction indicators not working |1.5.1c|2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))2
Front Stop lamp not working |4.3.1 |a| |ii||1
Rear Brake cable damaged excessively frayed |1.1.15 |a||1
Stop lamp not working |4.3.1 |a| |ii||1
Front Position lamp not working |4.2.1 |a||1
Rear Brake lever has insufficient reserve travel |1.1.2 |a||1
Rear wheel insecure |4.2.3b|1
Brake lever is inoperative Rear brake lever come`s back to the handle bar`s affecting braking performance |3.1.3c|1
Headlamp insecure |1.2.3b|1
Nearside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))1
Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))1
Offside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))1
Offside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))1
Rear reflector missing (4.8.2 (a) (ii))1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Front Brake hose excessively damaged (1.1.12 (b) (ii))1
Rear Brake drum significantly and obviously worn |1.1.14 |a| |i||1
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))1
Front Position lamp not working (4.2.1 (a))1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))1
Stop lamp not working rear brake |4.3.1 |a| |ii||1
Nearside Front Direction indicator not working |4.4.1 |a| |ii||1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Rear Rear suspension movement is excessively stiff |2.4.A.3b|1
Nearside Front Direction indicator not working |1.5.1c|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Stop lamp does not illuminate by the operation of both brake controls front or rear (4.3.2 (a) (iii))1
Direction indicator not working all not working (4.4.1 (a) (ii))1
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Rear Brake lever has inadequate reserve travel (3.1.3b)1
Riders seat insecure |6.2.5 |a| |ii||1
Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii||1
Fuel cap ineffective seal missing |6.1.3 |b| |i||1
Nearside Front Direction indicator light intensity significantly reduced obscured |4.4.3 |a||1
Handlebar mounting clamp bolt loose |2.1.1a|1
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Front Steering movement excessively stiff with the wheel raised |2.2.1b|1
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a))1
Nearside Front Brake excessively binding |1.2.1 |f||1
Nearside Rear Direction indicator not working |4.4.1 |a| |ii||1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))1
Front Headlamp light intensity severely reduced (4.1.4 (a))1
Rear Wheel fixing missing (single fixing) split pin missing (5.2.1 (a) (ii))1
Exhaust system insecure (6.1.2 (a))1
Headlamp aim not tested bulb blown |1.6|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Offside Front Footrest insecure |6.2.12 |a||1
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Rear Valve stem seriously damaged (5.2.3 (j))1
Front Stop lamp not working (4.3.1 (a) (ii))1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Front Headlamp aim not tested (4.1.2 (b))1
All direction indicators not working (4.4.1 (a) (ii))1
Front Handlebar restricted in free movement from lock to lock (2.1.4 (c))1
Headlamp insecure |4.1.1 |c||1
Offside Front Stop lamp not working (4.3.1 (a) (ii))1
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Stop lamp not working (4.3.1 (a) (ii))1
Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Front Brake fluid contaminated (1.8 (a))1
Nearside Front Direction indicator insecure |1.5.3b|1
Stop lamp does not illuminate immediately a brake applies Both levers |1.3.1a|1
Nearside Stop lamp does not illuminate immediately a brake applies Lever |1.3.1a|1
Nearside Brake lever has inadequate reserve travel Lever |3.1.3b|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy