| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 39 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 15 |
| Registration plate issues | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 5 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Fuel cap sealing washer missing |7.2.2c| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Rear Position lamp not working (4.2.1 (a)) | 1 |
| Fuel cap ineffective Seal missing (6.1.3 (b) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Riders seat insecure will not lock down (6.2.5 (a) (ii)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Stop lamp not working Front Brake switch (4.3.1 (a) (ii)) | 1 |
| Front Brake component is excessively corroded |3.1.5| | 1 |
| Rear Brake component is excessively corroded |3.1.5| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Offside Footrest missing |6.2.1a| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear suspension component seized |2.4A2a|ii|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Steering operation restricted in free movement from lock to lock steering excessively notchy |2.1.4 |c|| | 1 |
| Offside Front Front suspension assembly component loose shock snapped |2.3.1| | 1 |
| Offside Front suspension assembly component cracked shock snapped |2.3.1| | 1 |
| Steering headbearing excessively stiff or notchy excessively notchy (2.2.2 (f) (i)) | 1 |
| Rear suspension bearing has excessive free play Engine mounts |2.4.A2a|i|| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies lever |1.3.1a| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Front Stop lamp not working lever (4.3.1 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement side play in rear suspension/engine bushes (6.1.8 (a) (i)) | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |