Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Fuel cap sealing washer missing |7.2.2c| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Registration plate issues | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear reflector on motorcycle obscured |1.4.2b| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Lower Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Horn control defective |1.7.2a| | 1 |
Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front suspension assembly component excessively bent |2.3.1| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Upper Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Horn not working |1.7.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Horn not working (7.7 (a)) | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Riders seat with a defective supporting structure (6.2.5 (a) (i)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Upper Fork yoke deformed |2.1.1b| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Offside Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak FORK SEAL LEAKING BADLY (5.3.2 (b)) | 1 |
Rear Rear reflector missing COVERED BY THE L PLATE (4.8.2 (a) (ii)) | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |