Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Registration plate issues | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Nearside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Brake lever mounting insecure |3.1.2a| | 1 |
Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Horn not working |1.7.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Stop lamp does not illuminate immediately a brake applies n/s brake lever does not operate brake light |1.3.1a| | 1 |