>

MOT History from tests of petrol APRILIA AREAs year 2000

Review the list of common APRILIA AREA failures below or to perform a specific mot history check on your APRILIA then use our popular KnowYourCar service

mot history
Pass percent:71.89%
(The average a petrol APRILIA AREA year 2000 passes without issue)
Based on:249 MOT Tests
Most common failuresNo# failures
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|10
Exhaust is leaking and excessively noisey |7.1.1b|8
Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Headlamp aim out of alignment7
Registration plate issues5
Front wheel bearings have excessive free play |2.3.5b|5
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Steering headbearing has excessive free play |2.2.2|4
Rear suspension bush has excessive free play |2.4.A2a|i||4
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|4
Rear suspension bush excessively deteriorated |2.4.A2a|i||3
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|3
Horn not working |1.7.3a|3
Rear Brake disc|s| excessively worn |3.2.A1l|2
Rear Rear suspension bearing has excessive free play |2.4.A2a|i||2
Throttle operating incorrectly |6.2.1f|2
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Rear Stop lamp missing |1.3.3a|2
Wheel alignment incorrect which adversely affects the steering |2.5.1|2
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Front shock absorber seal failed and leaking oil |2.3.3|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Front suspension assembly has excessive free play in the pivot bearings. |2.3.2|2
Rear Exhaust is leaking and excessively noisey |7.1.1b|2
Rear Rear suspension bush has excessive free play |2.4.A2a|i||2
Front Brake disc|s| excessively worn |3.2.A1l|2
Rear Brake lever insecure |3.1.2a|1
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Front suspension has inadequate damping effect. |2.3.6c|1
Rear wheel spindle securing nut|s| loose |2.4.A.2b|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|1
Front Direction indicators affected by the operation of another lamp |1.5.1c|1
Rear Direction indicators affected by the operation of another lamp |1.5.1c|1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||1
Front suspension has an inadequate repair of a load bearing member or its supporting structure. |2.3.8|1
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Front Headlamp deteriorated and function impaired |1.2.3a|1
Front Steering headbearing has excessive free play |2.2.2|1
Rear Drive chain excessively loose |6.2.1d|1
Offside Rear Footrest missing |6.2.1a|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Rear Direction indicators flashing less than 60 times a minute |1.5.1c|1
Brake lever has inadequate reserve travel |3.1.3b|1
Exhaust excessively deteriorated |7.1.1a|1
Centre Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Direction indicators flashing less than 60 times a minute |1.5.1c|1
Hydraulic brake control feels spongy |3.1.4a|1
Front Stop lamp missing |1.3.3a|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Rear Brake lever has inadequate reserve travel |3.1.3b|1
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b|1
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b|1
Nearside Fairing so located that it is likely to impede the steering |2.1.2e|1
Offside Fairing so located that it is likely to impede the steering |2.1.2e|1
Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7|1
Exhaust mounting missing |7.1.1c|1
Stop lamp remains on when the brake is released |1.3.1e|1
Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d|1
Offside Rear Motorcycle structure adversely modified |6.1.1b|1
Front Fork yoke deformed |2.1.1b|1
Fuel system component leaking |7.2.1a|1
Riders seat insecure |6.2.1a|1
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Rear Front mudguard insecure |2.3.7|1
Motorcycle structure excessively corroded |6.1.1a|1
Fuel cap sealing washer missing |7.2.2c|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Offside Front Direction indicator not working |1.5.1c|1
Front Direction indicator affected by the operation of another lamp |1.5.1c|1
Horn control not functioning. |1.7.2b|1
Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Front Lower Steering linkage ball joint has excessive play |2.1.3 |b| |i||1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Nearside Steering lock stop missing |2.1.3|1
Front suspension assembly component excessively misaligned |2.3.1|1
Front suspension assembly component excessively corroded. |2.3.1|1
Front Horn not working |1.7.3a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy