Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 5 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 5 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
Offside Headlamp not working on main beam |1.7.5a| | 4 |
Rear fog lamp tell tale not working |1.3.1b| | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Brakes imbalanced across an axle | 4 |
Nearside Headlamp not working on main beam |1.7.5a| | 4 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 3 |
Offside Rear wheel bearing has excessive play |2.6.2| | 3 |
Horn not working |1.6.2a| | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Registration plate lamp issues | 3 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 2 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Headlamp insecure |1.7.3| | 2 |
Indicator tell tale inoperative |1.4.A.2a| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 2 |
Brake pipe excessively corroded | 2 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Emissions not tested |7.0| | 2 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 2 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Headlamp insecure |1.7.3| | 1 |
Nearside Direction indicators not working |1.4.A.2c| | 1 |
Offside Direction indicators not working |1.4.A.2c| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Nearside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Front Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Brake cable knotted |3.5.1b| | 1 |
Nearside Rear Brake pipe inadequately supported no rubber |3.6.B.1| | 1 |
Mechanical brake component has restricted free movement | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Brake pipe inadequately clipped |3.6.B.1| | 1 |
Brake pipe inadequately supported |3.6.B.1| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Steering retaining device missing |2.2.C.1g| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Front All position lamps not working both |1.1.A.3b| | 1 |
All position lamps not working both |1.1.A.3b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Side repeater missing |1.4.A.2b| | 1 |
Offside Front Side repeater missing |1.4.A.2b| | 1 |
Offside Front Driver`s seat insecure |6.2.A.1| | 1 |
Nearside Front Front passenger seat insecure |6.2.3| | 1 |
Nearside Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
Nearside Front Steering rack insecure |2.2.B.1a| | 1 |
Nearside Front Braking system leaking |3.6.A.1| | 1 |
Offside Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Front Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Brake hose has insufficient room to move | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Offside Front Front position lamp|s| insecure |1.1.A.3a| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel pipe leaking |7.2.3| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Front Direction indicators not working |1.4.A.2c| | 1 |
Rear Direction indicators not working |1.4.A.2c| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Fuel pipe leaking |7.2.3| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Nearside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Nearside Front Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Offside Front Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Nearside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Offside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/endcap (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/inner sill (5.3.6 (a) (i)) | 1 |
Nearside Rear coil spring fractured |2.4.C.1a| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front coil spring broken |2.4.C.1a| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing/wheel arch area |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/wheel arch area |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded area of floor/slll |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded area of floor/sill |2.4.A.3| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |