Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 3 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Brakes imbalanced across an axle | 2 |
Horn not working |1.6.2a| | 2 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Registration plate issues | 2 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front Steering component mounting prescribed area is fractured |2.2.C.1h| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Steering locking device missing |2.2.C.1g| | 1 |
Registration plate lamp issues | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Headlamp aim beam image obviously incorrect no beam pattern |1.8.A.1b| | 1 |
Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Steering locking device insecure |2.2.C.1g| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Brake cable locking device insecure |3.5.1l| | 1 |
Front brake application uneven | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear coil spring fractured |2.4.C.1a| | 1 |
Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Front Fuel system component leaking |7.2.3| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Fuel system component leaking |7.2.3| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Radius arm corroded and seriously weakened |2.4.G.1| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Statutory seat belt missing |5.1.1| | 1 |
Offside Front Statutory seat belt missing |5.1.1| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Brake cable has a seized clevis joint pivot |3.5.1c| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |