Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Offside Stop lamp not working |1.2.1b| | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Offside Front Brake pipe inadequately supported brake hose lock nut missing |3.6.B.1| | 1 |
Offside Front Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Rear Anti-roll bar insecure not connected |2.4.G.1| | 1 |
Offside Rear Anti-roll bar insecure not connected |2.4.G.1| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Seat belt anchorage prescribed area is inadequately repaired inner sill |5.2.6| | 1 |
Speedometer cannot be illuminated. |6.7.3| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Front Upper Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Seat belt not functioning as intended (7.1.2 (c)) | 1 |
Offside Seat belt not functioning as intended (7.1.2 (c)) | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 1 |
Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Bonnet cannot be secured in the closed position (3.1 (b) (i)) | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Inner Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Fuel pipe leaking |7.2.3| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Brake pipe inadequately clipped |3.6.B.1| | 1 |
Offside Track rod end ball pin shank loose |2.2.B.1c| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
rear parking |secondary| brakes imbalanced | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |