Most common failures | No# failures |
---|
Headlamp aim out of alignment | 4 |
Registration plate lamp issues | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Stop lamp not working stop lamp inop |4.3.1 |a| |ii|| | 1 |
Rear reflector missing rear reflector is missing |4.8.2 |a| |ii|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Fuel tank leaking (6.1.3 (b) (i)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Brake cylinder excessively weakened by corrosion (1.1.16 (d) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake cylinder insecure (1.1.16 (c) (i)) | 1 |
Brake hose damaged | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Shock absorber has a serious fluid leak fork seals |5.3.2 |b|| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear All position lamps do not illuminate immediately when switched on Also number plate light |1.1.3a| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Central Motorcycle structure excessively damaged |6.1.1a| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Offside Front Brake disc contaminated |1.1.14 |b|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Steering linkage component deformed to the extent that steering is affected |2.1.3 |c| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Brake fluid reservoir fluid not visible |1.1.10 |d| |iii|| | 1 |
Front Roller brake test indicates a severely juddering brake Roller tester indicates server fluctuation. |3.3.A1b| | 1 |
Nearside Rear Footrest missing L/H pillion footrest missing. |6.2.1a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Fuel system component leaking Engine oil leaking onto rear tire. |7.2.1a| | 1 |
Rear Rear reflector on motorcycle obscured obscured by L plate |1.4.2b| | 1 |
Offside Exhaust excessively deteriorated blowing and corroded |7.1.1a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |