Most common failures | No# failures |
---|
Headlamp aim out of alignment | 40 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 19 |
Registration plate issues | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Drive chain excessively loose |6.2.1d| | 14 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Front wheel bearings are excessively rough |2.3.5b| | 11 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Horn not working |1.7.3a| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Registration plate lamp issues | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Rear Drive chain excessively loose |6.2.1d| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Headlamp aim not tested |1.6| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Brake fluid reservoir severely damaged |3.2.B1b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
Exhaust system insecure (6.1.2 (a)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Front Horn not working |1.7.3a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Horn not working (7.7 (a)) | 2 |
Headlamp insecure |4.1.1 |c|| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Indicator tell tale not operating correctly |1.5.2| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
All direction indicators not working indicators not flashing (4.4.1 (a) (ii)) | 1 |
Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear position lamp damaged and function impaired not working |1.1.1b| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Footrest insecure |6.2.1a| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Horn missing |1.7.1| | 1 |
Wheel alignment incorrect which adversely affects the steering handle bars out of alignment |2.5.1| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s (1.2.2b(ii)) | 1 |
Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s (1.2.2b(ii)) | 1 |
Drive chain excessively loose (6.2.1d) | 1 |
Central Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Position lamp switch insecure |1.1.4b| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Stop lamp not working on handle bar lever (4.3.1 (a) (ii)) | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Direction indicator flashing more than 120 times per minute All |1.5.1c| | 1 |
Central Exhaust excessively deteriorated |7.1.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain circlip |6.2.1h| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp missing (4.1.1 (a) (ii)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Brake hose excessively deteriorated | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Offside Rear Suspension arm corroded and seriously weakened swing arm (5.3.3 (b) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Chain guard insecure (6.1.7 (i)) | 1 |
Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
Offside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Offside Front Suspension component has an unsafe modification (5.3.3 (c) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Fuel system component leaking fuel leak from carburettor (6.1.3 (b) (i)) | 1 |
Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Throttle operating incorrectly throttle housing loose on handlebar. |6.2.7 |a| |i|| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Footrest missing |6.2.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Lower Brake locking device missing |3.2.A1e| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Stop lamp does not illuminate immediately a brake applies Handbrake |1.3.1a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Roller brake test indicates a binding brake front |3.3.A1a| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake switch inoperative |1.3.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking front mudgaurd not fitted |6.1.1c| | 1 |
Offside Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Rear Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Valve stem seriously damaged could cause sudden de-flation |5.2.3 |j|| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Drive belt excessively tight |6.2.1d| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Indicator switch defective |1.5.4| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Rear All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Offside Front Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Stop lamp lens defective such that the emitted light is adversely affected pedal |4.3.1 |b| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
Exhaust has a major leak of exhaust gases front |6.1.2 |a|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake lever attachment screws loose lock nut |3.1.2b| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Nearside Front Shock absorber has a serious fluid leak fork corroded & pitted (5.3.2 (b)) | 1 |
Nearside Rear Footrest insecure bolts missing and locking pin missing (6.2.12 (a)) | 1 |
Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
Brake component insecure front hydraulic brake hose (1.1.21 (c)) | 1 |