MOT History from tests of petrol ADLY TBs year 2004

Review the list of common ADLY TB failures below or to perform a specific mot history check on your ADLY then use our popular KnowYourCar service

mot history

Pass percent:55.00%

(The average a petrol ADLY TB year 2004 passes without issue)

Based on:20 MOT Tests

Most common failures	No# failures
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Rear Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	1
Headlamp aim out of alignment	1
Centre Front Handlebar mounting clamp bolt loose \|2.1.1a\|	1
Centre Front Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	1
Offside Front Fairing insecure and likely to impede the steering \|2.1.2e\|	1
Nearside Front Front mudguard insecure \|2.3.7\|	1
Front Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	1
Nearside Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Offside Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Rear Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Front Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Front Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Offside Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Nearside Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Rear Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	1
Headlamp aim out of alignment	1
Centre Front Handlebar mounting clamp bolt loose \|2.1.1a\|	1
Centre Front Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	1
Offside Front Fairing insecure and likely to impede the steering \|2.1.2e\|	1
Nearside Front Front mudguard insecure \|2.3.7\|	1
Front Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	1
Nearside Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Offside Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Rear Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Front Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Front Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Offside Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Nearside Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	1

MOT History from tests of petrol ADLY TBs year 2004

Find us on Facebook