MOT History from tests of petrol ADLY FOXs year 2003

Review the list of common ADLY FOX failures below or to perform a specific mot history check on your ADLY then use our popular KnowYourCar service

mot history

Pass percent:80.00%

(The average a petrol ADLY FOX year 2003 passes without issue)

Based on:95 MOT Tests

Most common failures	No# failures
Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Front Roller brake test indicates a binding brake \|3.3.A1a\|	4
Headlamp aim out of alignment	3
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Horn not working \|1.7.3a\|	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Stop lamp does not illuminate immediately a brake applies front brake \|1.3.1a\|	1
Stop lamp does not illuminate immediately a brake applies rear brake \|1.3.1a\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Nearside Rear Direction indicator missing \|1.5.1a\|	1
Offside Rear Direction indicator missing \|1.5.1a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front Brake lever cannot be applied smoothly \|3.1.3d\|	1
Fuel system component leaking \|7.2.1a\|	1
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Front Motorcycle structure excessively damaged \|6.1.1a\|	1
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Fuel cap sealing washer deteriorated \|7.2.2c\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Front Roller brake test indicates a binding brake \|3.3.A1a\|	4
Headlamp aim out of alignment	3
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Horn not working \|1.7.3a\|	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Stop lamp does not illuminate immediately a brake applies front brake \|1.3.1a\|	1
Stop lamp does not illuminate immediately a brake applies rear brake \|1.3.1a\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Nearside Rear Direction indicator missing \|1.5.1a\|	1
Offside Rear Direction indicator missing \|1.5.1a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front Brake lever cannot be applied smoothly \|3.1.3d\|	1
Fuel system component leaking \|7.2.1a\|	1
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Front Motorcycle structure excessively damaged \|6.1.1a\|	1
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Fuel cap sealing washer deteriorated \|7.2.2c\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1

MOT History from tests of petrol ADLY FOXs year 2003

Find us on Facebook