Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 14 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 14 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Registration plate issues | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Horn not working |1.7.3a| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Rear Brake lever insecure |3.1.2a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Front Brake caliper|s| insecure |3.2.A1j| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Indicator switch insecure |1.5.4| | 1 |
Offside Front Direction indicator obscured |1.5.1a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Direction indicator insecure L/H/R |1.5.3b| | 1 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Brake cylinder severely damaged |3.2.B1b| | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Lower Motorcycle structure adversely modified |6.1.1b| | 1 |
Rear Motorcycle structure excessively distorted |6.1.1a| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Brake master cylinder severely damaged sight glass broken |3.2.B1b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Front suspension assembly component excessively bent |2.3.1| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Brake master cylinder severely damaged |3.2.B1b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake master cylinder severely damaged |3.2.B1b| | 1 |
Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Inner Rear Front mudguard insecure |2.3.7| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front suspension has excessive stiffness in the suspension movement. no movement in front suspension |2.3.6b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Suspension component likely to fail (5.3.3 (b) (ii)) | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Brake hose excessively deteriorated | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |