MOT History from tests of petrol TGB TGBs year 2006

Review the list of common TGB TGB failures below or to perform a specific mot history check on your TGB then use our popular KnowYourCar service

mot history

Pass percent:59.62%

(The average a petrol TGB TGB year 2006 passes without issue)

Based on:52 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	3
Offside Front Lower Suspension arm has excessive play in a ball joint \|2.4.G.2\|	2
Registration plate issues	2
Registration plate lamp issues	2
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	2
Throttle operating incorrectly \|6.2.1f\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front Direction indicators not working \|1.5.1c\|	1
Rear Direction indicators not working \|1.5.1c\|	1
Front Horn is not a constant note \|1.7.3c\|	1
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Rear Brake component is excessively corroded \|3.1.5\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Offside Front Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Steering system fouling \|2.2.D.2a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	3
Offside Front Lower Suspension arm has excessive play in a ball joint \|2.4.G.2\|	2
Registration plate issues	2
Registration plate lamp issues	2
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	2
Throttle operating incorrectly \|6.2.1f\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front Direction indicators not working \|1.5.1c\|	1
Rear Direction indicators not working \|1.5.1c\|	1
Front Horn is not a constant note \|1.7.3c\|	1
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Rear Brake component is excessively corroded \|3.1.5\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Offside Front Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Steering system fouling \|2.2.D.2a\|	1

MOT History from tests of petrol TGB TGBs year 2006

Find us on Facebook