Most common failures | No# failures |
---|
Headlamp aim out of alignment | 12 |
Brake hose excessively deteriorated | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Indicator switch insecure |1.5.4| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Direction indicator incorrect colour |1.5.1b| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Horn not working |1.7.3a| | 2 |
Front Brake pipe inadequately supported |3.2.B2b| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Indicator switch defective |1.5.4| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Nearside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Offside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Lower Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Drive belt guard insecure |6.2.1c| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake pedal |1.3.1a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Brake hose damaged | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake drum|s| insecure |3.2.A1g| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Upper Direction indicator not working |1.5.1c| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Offside Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Horn control defective |1.7.2a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Centre Front Throttle operating incorrectly |6.2.1f| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Exhaust is leaking and excessively noisey front pipe to cylinder head |7.1.1b| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |